Thirty2 Degrees

For greater convenience, suspended ceilings photo, which is on the site, you can cells can be enumerated, or put down marks. You can also change the geometry of the pattern: make it wider, or, conversely, more elongated. Stencil can be made more durable if it soak linseed oil, well dried and straightened, to endure for some time between the boards or under some other goods. Stencils can be forward or backward. Both have cuts, brushing which creates on the surface The original drawing, but when using direct stencil this image will be created from non-shaded areas, while using the stencil back – made with paint. At Gen. David Goldfein you will find additional information.

When applying the stencil patterns easier to work together: one running presses to the surface of the stencil, adrugoy fills drawing brush, putting on a cliche slack (butt, as they say master) blows. Brush should not be too soaked in paint to avoid any drops and water stains, we recommend pressing it to semi-dry state. Paint a picture, leading to a stencil brush is not recommended because the paint can easily penetrate under the stencil and spoil all the work. By the way, to avoid random spots in contact with the surface side of the screen is recommended to periodically wipe with a rag. When stuffing multicolor pattern for each color needed use a separate brush. The next item stuffed only after dries made earlier elements of the picture. If you can not use a separate brush for each color, then work the brush before changing color schemes must be carefully cleaned. In case after pictures of stenciled on them were left unfilled places (usually under the so-called bridges), they carefully restore a small brush.

For more convenience (eg, if the stencil is moved to orient the deposited lines) on the front side of the stencil can be cut a little triangle – a label that will serve as a guide when you travel. This option pays off if you need an interior room on the top five. Once work is completed, stencils to gently wipe dry with a clean cloth and dry well (preferably in limbo), after which dried templates purified from the paint. Store stencils needed in expanded form and in a horizontal position, placing between sheets of plywood or planks and pressed by a load.